We’re consistently getting great feedback about the recent (June 2024) software update and new “tuning” process we do on the test bench. This provided much more accurate SOC feedback to the customer, but short term and long term. The numbers are now aligning closely with the very trusted Victron Smart Shunt, and that’s a podium we’re more than happy to be included on.
It took a lot of work, trail and error to figure out where the issues were, and how to fix them, but we did it.
These are a couple of comments from the past few days…
“Your BMS software tuning of SOC was a total success”
“Hi guys,
Since updating the recommended settings in scout BMS I find I’m using it as often as the Victron shunt as they seem to be in sync with same read out data which is fantastic.”
If you have a battery that is pre-July 2024, and you have not yet done the BMS software upgrade, then this may help provide more accurate results for your setup. Go to this link to request the instructions, there’s no need to bring your battery in or even remove it from your system.
https://powerpaul.com.au/powerpaul-battery-daly-software-upgrade/
